£41,000 +VAT
VARIMASTER L 95 EXTENSION, T-SAFTEY, 6 BODIES, HYDRAULIC FRONT FOLDING, CAT3, HYDRUALIC OFFSET, 1 DISC COULTER ON LAST BODY, 570MM NOTCHED DISC COULTER L BODY WITH OLYMPIC POINT, WITHOUT LADNSIDE WEAR PLATE, ZXL S...
Autotrader farm
Skip to contentSkip to footerWith 182 used Tillage Other available on Auto Trader, we have a fantastic range of farm equipment for sale across the UK.
£41,000 +VAT
VARIMASTER L 95 EXTENSION, T-SAFTEY, 6 BODIES, HYDRAULIC FRONT FOLDING, CAT3, HYDRUALIC OFFSET, 1 DISC COULTER ON LAST BODY, 570MM NOTCHED DISC COULTER L BODY WITH OLYMPIC POINT, WITHOUT LADNSIDE WEAR PLATE, ZXL S...
£5,750 +VAT
Hydraulic folding, and fitted with rear crumblers Heavy duty frame. Crumblers worn but serviceable. Serial Number: 52027
Weaving 6M
2006
£9,950 +VAT
C/w pre em markers and following harrow This drill was previously 're-worked' by Weaving Machinery and is in good condition throughout. Fitted with pre em and bout markers, and the wearing metal is ready for wor...
£1,950 +VAT
C/w leading tines Cast ring packer that folds to sub 3m for transport and manual fold tines. Also comes with an extended drawbar(not pictured) for use in a cultivation train. Serial no: 1135
£4,950 +VAT
C/w 13 shearbolt legs, mixing discs and rear crumbler Good strong frame, will go straight to work. Wear on the crumbler bars but still usable.
£6,950 +VAT
C/w leading tines, very good condition. A good press ready to work.
Sumo GLS
2011
£10,950 +VAT
C/w new legs and points, leading discs and tooth packer In very tidy order, ready to work!
£1,750 +VAT
C/w depth wheels and leading discs Legs slightly out of line with each other due to a slight twist in the beam close to the nearside leg. Good metal
£1,750 +VAT
Outside legs can be adjusted out to suit up to 80' tramlines if required. 2.4m overall width. A strong but compact subsoiler which will work with some of the smaller horsepowers if needed. Done little work from n...
£1,650 +VAT
C/w good wearing parts Hydraulics and cable lift system all working correctly. Fitted with trash knife. Serial No: MP220
Simba XPRESS 5.5
2004
£12,500 +VAT
Fitted with track eradicator tines. 2 rows of angle adjustable discs and rear DD packer. Plenty of life remaining on the discs and good tyres. Serial no: 113540044
£1,175 +VAT
C/w 2 rows of tines Chain drive is not working so sold as is for spares or repair. Serial Number: K38328
Vaderstad CR500
2001
£10,750 +VAT
Fitted with nearly new 450 discs. Comes with a cast ring packer. Straight enough machine but the paint is quite faded. 2.5m transport width. Serial no: 711
£4,950 +VAT
C/w 24' good plain rings Good straight condition, will go to work. 1 broken ring to be replaced before sale. Serial Number: 98349
Dowdeswell Dafp
2001
£975 +VAT
Qty 25 - 700mm cast rings. Comes with telescopic draw arms and 3pt linkage for transport. Will need a some TLC before going to work as a couple of the bearings have failed, a few broken spokes and the draw arms n...
£2,950 +VAT
C/w rear tooth packer 5 legs at 700mm spacing with shearbolt protection. Metal is reasonable, comes with some spare feet. Sound frame. Transport width: 3.6m
Opico 1738032
2007
£3,250 +VAT
C/w depth wheels 7mm tine with angle and pressure adjustment, contouring frame and folds to a transport width of 3m. In good condition, tyre will be sorted before sale. Serial Number: 2757-14/06
£12,500 +VAT
C/w 9 auto-reset tines. Front and rear disc gangs, 9 hydraulic auto-reset tines with hydraulic depth control and rear 740mm Emopak press. The frame has been strengthened in a few places. 3m transport width. Seri...