Autotrader farm

Skip to contentSkip to footer

Used Ploughs for sale

With 52 used Ploughs available on Auto Trader, we have a fantastic range of farm equipment for sale across the UK.

Latest used Ploughs for sale

View morechevron-right
  • £7,950 +VAT

    Fitted with good metal throughout! In tidy order and turns over well. Serial Number: 636 Drive: 2WD

  • £3,450 +VAT

    Hydraulic vari width Lines up quite well, however does have a few welds as shown in the pictures. Boards worn but most other metal serviceable. A good value 6 furrow hydraulic vari width plough!

  • £5,450 +VAT

    C/w skims and rear discs A nice plough! Serial Number: 00362

  • £14,750 +VAT

    5+1 configuration, fitted with L bodies. C/w hydraulic front furrow adjustment, full set of skimmers, rear discs, depth wheel, press arm, 80cm underbeam clearance, 96cm point to point and manual vari width (curre...

  • £13,750 +VAT

    On-land or In-furrow, fitted with No. 8 bodies. 5+1 configuration and c/w twin depth/transport wheels, maize skimmers, hydraulic vari width and hydraulic front furrow adjustment. Serial no: 120

  • £1,250 +VAT

    3+1 configuration. For spares or repair. The beam has several welds as does the headstock, missing some of the skimmers but plenty of good wearing metal and spares. Fitted with very good WS11B bodies.

  • £2,750 +VAT

    Very heavy duty tines. 10 heavy duty sping tines, levelling tines and rear coil press. Comes with 2 depth wheels and height adjustment on the coil press. 3.9m transport width. Serial no: 434107

  • £3,950 +VAT

    On good DD bodies. 5+1 configuration. A straight plough in tidy order. Reasonable life remaining throughout and c/w a full set of skimmers, rear discs and depth wheel. 16' furrow width and 34' point to point. Se...

  • £10,950 +VAT

    5+1 configuration - hydraulic vari-width. Fitted with No:8 bodies(1 new board, the rest are just getting sharp), maize skimmers, manual front furrow adjustment and single depth/transport wheel. Benefits from Tung...

  • £2,450 +VAT

    C/w trash boards and skimmers. Turns over well and is fitted with rear discs, depth wheel and still on its original No. 8 bodies. Boards are very good. Serial no: 623

  • £2,450 +VAT

    To suit Track Marshall crawler or similar. Fitted with TCN mouldboards, discs, skims and rear depth wheel. Drive: 2WD

  • £41,000 +VAT

    VARIMASTER L 95 EXTENSION, T-SAFTEY, 6 BODIES, HYDRAULIC FRONT FOLDING, CAT3, HYDRUALIC OFFSET, 1 DISC COULTER ON LAST BODY, 570MM NOTCHED DISC COULTER L BODY WITH OLYMPIC POINT, WITHOUT LADNSIDE WEAR PLATE, ZXL S...

  • £2,250 +VAT

    Fitted with DDS bodies. C/w a full set of skimmers, manual vari-width and depth wheel. Serial no: 97MS3647

  • £5,950 +VAT

    Good wearing metal. 5+1 configuration, DDS bodies, pin adjust skimmers, manual vari-width and depth/transport wheel. Some wear in the main pivots but is otherwise a genuine plough. Serial no: 11MA36078

  • £1,150 +VAT

    SCN bodies and full set of skimmers 2+1+1 configuration, steel depth wheel and manual front furrow adjustment. A mix of boards, some are sharp some nearly new. Turns over but there is some wear in the headstock. ...