Bobcat Ez19
2022
£16,500 +VAT
Very good condition, long arm reach very low hours full cab radio heaters

Autotrader plant
Skip to contentSkip to footerWith 57 used machines in Royston available on Auto Trader, we have a fantastic range of plant equipment for sale across the UK.
Bobcat Ez19
2022
£16,500 +VAT
Very good condition, long arm reach very low hours full cab radio heaters

£11,500 +VAT
Hammer pipe work, 4 buckets, Harford Prolok manual quick hitch, keypad immobiliser, lifting eye, long dipper arm: 1120mm - 2350mm dig depth, 2 speed tracking, variable width undercarriage 990mm < 1300mm. Straight...

£16,500 +VAT
Hammer pipe work, Harford Prolok manual quick hitch, 3 buckets, long dipper 1350mm arm: 2965mm dig depth, heated cabin, immobiliser, 2 speed tracking, variable displacement pump, auto idle, green beacon. Straight ...

£8,500 +VAT
Good condition. Hammer pipe work, 3 buckets, 1720mm dig depth, variable width undercarriage 700mm < 860mm. Straight chassis and panels with no damage, good paint work, slight play in the kingpost - not excessive...

£3,500 +VAT
1 Ton High Tip Tracked Dumper. Loncin petrol engine, electric start, pullcord backup, hydrostatic transmission, tipping height 1300mm, width 750mm, weight 670Kgs - can be towed on a plant trailer. Straight skip a...

JCB 8025 ZTS
2013
£15,950 +VAT
Piped for breaker, 3 buckets, 2800hrs. A respectable digger that has had some paintwork done in its time. Runs well, with 2 speed tracking working and trackwork is very serviceable.

JCB 525-58
1991
£7,950 +VAT
C/w pick up hitch and pallet forks A capable machine with plenty of poke! In fair condition for its age, it is now showing 11,098 hours but runs and drives well. *NOTE: there is a significant leak from the exhau...

£12,250 +VAT
Hammer pipe work, manual quick hitch, 3 buckets, heated cab, long dipper arm: 950mm - 2250mm dig depth, 2 speed tracking, variable width undercarriage 990mm < 1240mm, straight cab and chassis with no damage, sligh...

£9,500 +VAT
Good condition. Hammer pipe work, immobiliser, 3 buckets, green beacon, long dipper 1150mm arm: 2670mm dig depth, straight chassis and panels with no damage, small crack in the platform floor, good paintwork. New...

£8,500 No VAT
No VAT. Good condition. Hammer pipe work, 3 buckets, 1720mm dig depth, variable width undercarriage 700mm < 860mm. Straight chassis with no damage, the front orange panel has been damaged, good paint work, new p...

£67,500 +VAT
Done just 5455 hours! Fitted with 6 way 12ft blade, joystick control and also with rear linkage. See photos for track condition, blade is good, this could go straight back to work. Serial Number: DHA02256

Roadless J17
1955
£6,500 +VAT
Runs and drives well! Based on a Fordson Major Mark 1 with the 4 cylinder diesel. Starts quickly and drives and steers as it should. The trackwork all looks to be in good condition and is still fitted with the or...

Merlo P33.7
2003
£12,500 +VAT
C/w pick up hitch and pallet tines Powered by a Perkins engine, this is a respectable looking handler now recording 11,064 hours. NOTE: significant wear in front axles, headstock pin, and bottom end of main lift...

£5,500 +VAT
125 CFM, 7 BAR, Kubota V1505 diesel engine, Hard Hat canopy. Starts first time, runs and makes air. Straight chassis and canopy, good paintwork, towable condition, fully serviced. Part exchange welcome, finance o...

£5,800 +VAT
Fitted with 3 point linkage. Starts, runs, drives and steers well. Rear PTO and linkage are all working. Quite a complete example with the engine covers and County serial plate all there. Tractor serial no: 1287...

£950 +VAT
C/w removable sides Handy little trailer in reasonable condition. The lift ram has a bit of a leak but nothing stopping it from going to work. Missing the rear tailgate. Serial no: 6419

£65,000 +VAT
New and unused. Hill Tefra hydraulic quick hitch, choice of 3 buckets, hammer pipe work, X3 third hydraulic rotation circuit, proportional control joysticks, floating dozer blade, green seatbelt beacon, electric ...

£31,000 +VAT
New and unused condition. Hammer pipe work, manual quick hitch, choice of 3 buckets, long dipper arm: 1500mm - 3088mm dig depth, 2 speed tracking, adjustable auxiliary hydraulic flows, auto idle, variable displace...

£30,450 +VAT
New and unused condition. Hammer pipe work, hydraulic quick hitch, choice of 3 buckets, long dipper arm: 1350mm - 2965mm dig depth, 2 speed tracking, adjustable auxiliary hydraulic flows, auto idle, variable displ...

£5,250 +VAT
500KGS High Tip Tracked Dumper. Diesel electric start engine, hydrostatic transmission, tipping height 2720mm, width 690mm, weight 475Kgs - can be towed on a plant trailer. Straight skip and chassis with no dama...
