Used farm machinery in Newmarket for sale

In very tidy condition. 32 coulters at 125mm spacing, tramlining, bout markers, PTO drive fan and land wheel drive. Serial no: 17421

In very good order! Looks to have done very little, C/w cable controls, A-frame stabiliser, hydraulic break back protection, good Y flails and rear rolls. The head has an 800mm cutting width. Serial no: 31806

Fitted with toothed rear packer. Runs up well and would go to work. Serial no: 28610/10

In very nice order! Fitted with microgranular rollers and in good order throughout. Serial no: CA0400208

24m hydraulic fold booms, 4 section cut off. C/w PTO hydraulic pump and fitted granular rollers. Fan runs up well and comes with a Quantron L control box and a range of spare parts including mirco-granular Avadex...

Full suspension, 50kph and just 4145 hours. A good spec tractor fitted with the 50kph 24/24 Hexashift gearbox, front axle suspension, cab suspension, 3 ESVC, 540/540E/1000/1000E PTO, air and hydraulic trailer bra...

Front or rear mount - hydraulic side shift. Runs up reasonably well but would benefit from a new set of flails. Fitted with rear roller. 540 PTO speed. Serial no: 120860 Drive: 2WD

C/w leading tines. A-frame mount and locking steering mechanism. 3.15m transport width.

155hp on boost! A mighty little tractor fitted with a John Deere 4 cylinder engine, 24/24 40kph Hexashift transmission, front linkage, 1 front SCV, front axle and cab suspension, 3 SCVS, 540/1000 PTO, hydraulic t...

C/w front levelling boards Needs some TLC but the frame is good, hydraulic fold is working with no leaks, transport and depth wheels are all holding air and the adjusters are free. A number of tines have been rem...

Fitted with double spiral packer. C/w track eradicators, 2 rows of sprung tines, levelling bar, Accord A-frame and through PTO. For use with or without a piggyback drill. In good order! Serial no: 3178

Runs up very well! Good blades, coil packer. Serial Number: 186136

Heavy Duty! To fit McConnel Shakaerator or simliar. Will need new adjusters.

No. 28 bodies and hydraulic vari-width. 6+1 configuration, hydraulic front furrow adjust, hydraulic vari-width, full set of skimmers and dual depth wheel. Some of the boards are just getting starting to get sharp...

C/w hydraulic adjust discs. 5 QUICKFOOT rigid loosening tines at 600mm centers with shearbolt protection, 2 rows of 500mm discs with hydraulic adjustment and 650mm Razor ring packer. 3m transport width. Serial n...

Good wearing metal. Fitted with front cutaway discs, rear discs, hydraulic angle adjustment on front gang, manual angle adjustment on rear gang and rear drawbar. Good bearings and scrapers throughout. Serial no:...

To fit John Deere 7530 or similar. Front wheels – Kleber Super 3 tyres with 28mm tread remaining. Hub fitment: 10 x 335mm, Stud size: 21mm, Center bore: 281mm, Adjustable Centers Rear wheels – Continential C...

To suit Claas Arion 540 or similar. Front wheels – Continential Contract AC85 tyres with around 15mm tread remaining however one shoulder is very worn. Hub fitment: 10 x 335mm, Stud size: 22mm, Center bore: 281...

C/w leading cutting discs, in very nice order. Serial Number: 37250

Only 3853 hours! C/w Garford front linkage This is a tidy 2WD tractor which has been on the same farm from new, with 2 double spool valves, pick up hitch and hydraulic trailer brakes. In the cab it has passenger...