Used farm machinery in Canterbury for sale

Perfect BG-150 Flail/Pulveriser Mower 1.5m cut Rear roller Brand-new set of flails and bolts Manual side shift Cat 1 and 2 linkage Year 2000

Toro Reel Master 5510 3660 hrs, Year 2008, 4 Cylinder Diesel,  2.5m Cut, with a cutting height range of 6.4mm to 25.4mm New bottom blades and has been sharpened, Rear Roller Brushes,  Ex golf course Serviced...

Three-point linkage Bale Spike Cat one and two linkage

McConnel woodworker sawbench, 3pt linkage, PTO driven, sliding top

Albutt 1300 shear grab, 2001, 1.3m wide, 0.6cu/m capacity, c/w Quicke brackets

Teagle tomahawk 5050 For silage/straw Round bale shredder Been barn stored

Kubota/ D.W.Tomlin FR114 roll, 1.2m x 20”, water filled, scraper bar, had very little use,

A.W. Trailers 1ton tipping trailer, 2m05 x 1m90 external size, 18” dropsides, wind up jack, had very little use paint still floor, been barn stored, owned from new

Fleming AYS yard scrapper, 2014, 3pt linkage, manual push/pull release, 2.2m wide,

Turner Turbomower 64 Heavy Duty Flail Mower 3pt Linkage, PTO Driven, 5ft 4” Cut, 6ft 4” Overall Width, Rear Roller, Privately owned, done little work and just had new rear roller bearings.

Manual Fold Chain Harrow 4.4m Wide Frame (14.5ft) Good condition mat Cat 1 or 2 linkage

Kubota G1900 HST Diesel Ride On Mower Year 2000, With 957hrs, Power 4 Wheel Steering, 48” Cut Deck, Nice Example, 1 owner from new, regularly serviced with full service history by main dealer.

Stiga Park Pro 900WX Ride on Mower Year 2021, With 484hrs, Articulated Steer, Combi Pro 125 Q Plus Deck, 1.25m Cut,  Honda GVX 630 Petrol Engine, Road Registered

Stiga Park Pro 540 IX Ride on Mower Year 2021, With 690hrs, Stiga Combi 125 Electric Mower Deck, Articulated Steer, 1.25m Cut, Honda GVX 630 Petrol Engine, Road Registered,

I had it from new , only used few times .

Kubota M130X - 130hp - 2011 - Low Use - Ready to Work Kubota M130X in good condition. I've owned the tractor for a few years and it has been lightly used and well looked after. Everything works as it should - st...

Major MR180 Finishing Mower Year 2001, 1.8m Cut,  3 Pt Linkage, PTO Driven, 3 Blades,  Adjustable Working Depth,  4 Rubber Pivoting Wheels

MF Trip Loader to Fit MF 135 Tractor, c/w Bolts, brackets, light guard and pipes with spool block and change over valve, piped for tipping bracket ram and 3rd service, Came off a 1 Owner Tractor,

Front bucket to fit MF 135 trip loader with hook fittings, 1.1m wide, ref no:243A

Carterhouse 9738/1 rear forklift, 3pt linkage, hyd. lift, 1ton capacity (dependant on weight of tractor), 6ft lift height with wheels on ground,